In fact, you can express creativity through the installation and test the wallpaper.
To make the wall look different or have a focal point, the game is appropriate wallpaper. Design it yourself is not difficult.
Follow these 10 steps below:
Equipment
Prepare the necessary equipment, such as plastic sheeting, household appliances, cutter, pencils, rulers and gauges, thread with ballast, wallpaper glue, tubs for mortar, glue (2 pieces), sponge, brush glue, rollers, sandpaper, and a putty knife to smooth walls.
Glue
After the plane of the wall or the surface is ready, mix the glue with water. Make two separate tubs, the glue to the connection and glue for the whole. Glue the connection part is thicker, so that the adhesive power is higher.
Measurement
Measure the length & width of the area to be covered with wallpaper. Adjust the width of the field to the width of the wallpaper. Exaggerating about 1 to 1.5 centimeters for the connection section.
Cutting
Cut the length of wallpaper into panels, but tailored to the needs. See the installation instructions on the paper in each package description that explains how to harmonize their motives between panels or pieces of wallpaper.
Position
Mark the position of the wallpaper with a pencil. Use the tools in the form of threads by means of ballast to make it straight and neat.
Coat
Once marked, the glue with a roller brush on the surface to be coated wallpaper. Perform this step slowly.
Patch
Paste wallpaper with caution. Note the marking that you have previously made using pencil.
Connection
In the connection, use a more viscous glue. Brush with a special brush in this section.
Flatten
Flatten the pre-installed wallpapers with acrylic ruler. Cut leftover wallpaper with a cutter. Use a sponge to soak up the excess glue. This process also serves to flatten the wallpaper.
Check
Once installed, check again to ensure that neat, especially on the connections and corners.
Good luck!
10 Easy Ways to Install "Wallpaper"
4/
5
Oleh
Unknown
